Hercules Technical Support
http://ts.hercules.com
1
DJ Console RMX – Windows Audio Firmware Update Procedure
1)
Make sure that USB errors are reported. In order to be sure of this,
open the
Device Manager
(click
Start/Run
and enter the following command:
devmgmt.msc
press Enter), then open the USB section, and for each host controller:
- Double click on the host controller icon
- Open the
"Advanced"
tab
- Make sure that the
"Don't tell me about USB errors"
checkbox is unchecked
2)
Download the latest package from the web:
ts.hercules.com
3)
Install the package. When asked to connect your
DJ Console Rmx
, just click on
Next
(
do NOT plug in the device
) until it reaches the end and completes the
installation process
At this point, a message saying that the
Drivers are older than expected..
will
appear. This is perfectly normal since no console was connected during the
installation process. Click
OK
and proceed to
Step 4
4)
Make sure the Control Panel (=
CPL) is closed.
- Open
Windows Task Manager
- In the Process tab, select
HDJSeriesCPL.exe
- Click the
End Process
button
5)
Open the
Device Manager
if not already open
6)
Press and hold the
MIC On/Off
button on the console
