Hercules Wireless N Router
HWNRi-300
4/74 – User Manual
-
WPA-PSK
with TKIP or AES encryption (802.11i security protocol)
-
WPA2
and
WPA2-PSK
with TKIP and AES encryption (802.11i security protocol)
Supports NAT/NAPT IP sharing
Filtering by
MAC address
/IP address, URL blocking
Anti-DoS
firewall
WMM
mode support (Wi-Fi MultiMedia™)
WPS
(Wi-Fi Protected Setup
TM
)
WAN mode support (PPPoE, automatic DHCP, static IP)
LAN mode support
Router mode support
Supports virtual server and DMZ
Supports WDS mode
Supports special applications (Port Triggers)
Supports DDNS (DynDNS, TZO) and QoS
Supports VPN pass-through (IPSec/PPTP)
802.11n
wireless
access point
RF specification: frequency band = 2.4GHz – 2.484GHz
Maximum transmission power: 100mW
2 integrated antennas
4 RJ-45 connectors for a Fast Ethernet 10/100Mbps connection
Auto-MDIX support (automatic detection of crossed cabling)
Conforms to the IEEE 802.3u specification
IEEE 802.3x flow control support in Full Duplex mode
External DC power supply. Input: 200~240V, 50/60 Hz; output: 9V DC/1 A
WiFi on/off button
WPS
button (Wi-Fi Protected Setup
TM
)
Restore factory settings button
White LEDs on the unit's front face, visible only when the router is powered on
Software update via Ethernet port
Router configuration software
System status and security information
1.3.
Minimum system requirements
To access configuration settings:
Intel® Pentium® III 1GHz processor or higher
512MB RAM
Ethernet 10/100 RJ45 network card
CD-ROM drive
Operating system: Windows XP with Service Pack 2, Windows XP Tablet PC Edition or Windows Vista®
Home Premium Edition, Ultimate, Business or Enterprise Edition, including 64-bit editions, Microsoft®
Windows® 7
To access the Internet:
Active Internet line
Internet Explorer 6.0, Netscape Navigator 4.7 or Mozilla Firefox 1.0 or higher
ADSL Ethernet modem, cable modem, Internet “Box” (Livebox
®
, Freebox
®
, SFR Neufbox
®
…)