Page 9
For technical questions, please call 1-888-866-5797.
Item 57673
Assembly
Mounting Table Saw
1. Select a workbench or mounting location that is
able to support the weight of the Table Saw, plus
any additional weight placed on it during use.
2. Make sure there are no hidden electric wires,
cables or other obstructions that may interfere
with the mounting procedure or cause a hazard.
3. Mark the mounting hole locations at the base
of the Saw and drill the appropriate size holes
for the mounting bolts (not included).
4. Mount the Saw using bolts, washers
and nuts (not included).
Attaching the Handwheel
1. Remove Handwheel from its storage box
located underneath the Table Saw.
Storage
Box
2. Remove tape and Set Screw from Handwheel.
3. Place Handwheel on Spindle and align holes
on both the Spindle and Handwheel.
Handwheel
Bevel
Scale
Spindle
4. Use Set Screw to fasten Handwheel to the Spindle.
5. Tighten Set Screw.
Removing the Table Insert
1. Lower the blade by turning the Height
Adjustment Knob counter-clockwise.
Height Adjustment Knob
2. Lock the blade by turning Bevel
Lock Handle clockwise.
Bevel Lock Handle
3. To remove Table Insert, turn the Insert Lock
clockwise. Using finger hole on the insert, pull up
and forward to expose the inside of the saw.
Table Insert
Insert Lock
4. To reinstall the table insert: Push insert down in
place and turn the Insert Lock counterclockwise.
