Clean blender after each use. Begin by unplugging the power cord from the
electrical outlet. Remove the pitcher from the blender's base and rinse it with
warm water. Dry the pitcher with a soft cloth, being careful to avoid touching the
sharp blades. Alternatively, the pitcher can be air-dried by placing it upside
down on a counter-top dish rack. Wipe the base of the blender with a soft, damp
cloth. Always make sure the blender is unplugged when it is not in use.
CLEANING & MAINTENANCE:
CLEANING & MAINTENANCE:
TROUBLESHOOTING WHEN BLENDER IS NOT WORKING:
TROUBLESHOOTING WHEN BLENDER IS NOT WORKING:
Check the safety circuit breaker switch
(for over current protection, this is usually
located on the back of the blender or underneath the blender base) Push or ip the
button to activate the switch.
Make sure the blender cord is properly connected into the electrical wall socket.
Check to make sure there is not a power outage or a blown fuse in your home.
First, unplug the blender cord from the electrical wall socket. Make sure the blender
pitcher and blades are properly attached and placed on the base correctly. After you
have checked to make sure all of the parts are properly and safely attached, plug the
blender in and turn it on.
9
OFF
ON
ON
OFF
Low-Speed
High-Speed
POWER
MAXPOWER
1
2
4
5
6
3
1500W
OTJ-767
High Performance Heavy Duty Blender
3 Year Warranty
