Page 7
For technical questions, please call 1-888-866-5797.
Item 56879
Tool Changing
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Make sure that the Trigger is in the OFF position
and unplug the tool from its electrical outlet before
performing any procedure in this section.
Installing / Removing Blade
1. Rotate the sleeve of the Clamp counterclockwise
and insert the saw blade (sold separately) fully into
the Clamp. Release the sleeve to close the Clamp.
2. Check that the Saw Blade is firmly locked in
place and that the teeth are pointed downward.
3. To remove blade, rotate the sleeve of the Clamp
counterclockwise to open the Clamp. Remove
blade from Clamp and then release the sleeve.
WARNING!
To prevent serious injury: Before
connecting the power cord for each use, wear
work gloves and pull on the Saw Blade to make
sure it is securely locked in the Clamp.
Clamp sleeve
Adjusting Hook
1. The Hook may be used to hang the saw, if desired.
2. Grasp Hook and pull out. Rotate Hook
to desired position.
3. Return Hook to holding position when not in use.
Adjusting Pivoting Shoe
1. Press the Pivoting Shoe Lock in and adjust
the Pivoting Shoe to the desired location.
2. Release the Pivoting Shoe Lock
to lock Shoe in place.
Pivoting Shoe Lock
Setting and Testing
1. Set the Trigger to the OFF position and ensure
the Blade is correctly attached to the Saw.
2. Connect the power cord to the outlet.
3. Be sure saw blade is not touching any
surface and squeeze Trigger to start the tool.
Continue to run the tool for 30 seconds.
4. If abnormal noise/vibration occurs or
the blade loosens, have the problem
corrected before further use.
5. Release the Trigger. Allow the saw to come
to a complete stop before setting it down.
