CLEAN I NG
A N D C A R E
www.hercke.com | 866.767.3905 ext.16
Please visit
www.hercke.com
to download these instructions in your preferred language.
Clean stainless steel surfaces using dry soft cotton cloth and stainless steel polish, buffing vertically
with the line finish of the stainless steel.
Clean painted surfaces and coated surfaces using a mild dish soap and warm water solution.
DO NOT
use abrasive cleaners, glass cleaners, solvent based cleaners or furniture polish.
© Copyright 2008 Hercke International. All rights reserved. Hercke®, Series 7even®, System 7even.1®, System 7even.2®, and System 7even.3® are registered trademarks of Hercke International.
A
Before attaching doors fasten Single E-Clips and Double E-Clip which will link vertically and horizontally
stacked units as illustrated. (use as needed)
B
Loosen screws and place clip flush with cabinet case.
C
Tighten screws to fasten units in place.
3
C
C
D
D
