Heras CS UNI MID, Руководство пользователя

Страница: 13 / 30

EN – Translation of the original user manual - 1.0 | 2022 13
With double swing gates, locking pins are also used to lock the leaves in the centre
when closed.
Integrated locking pin
The integrated locking pin is mounted in the locking post of the gate leaf. It con-
sists of a locking lever, blocking plate and locking tube. The tube can be slid in and
out using the locking lever.
To lock the gates properly, it must be possible for this tube to sink at least 3 cm
into the ground or the stop plate/block (available separately). By turning it so that
it is locked, the blocking plate will be blocked by the deadbolt*.
* For gates with a Heras surface-mounted lock (such as the types Euro 2 and
Proteus 2), the locking tube has a free play of ±4cm before it is blocked by
the deadbolt. Keep this in mind during assembly.
Illustration 3: Integrated locking pin principle
Lock
locking pin
blocking plate
locking lever