HER CHEE GTC-50, Руководство по обслуживанию

Страница: 39 / 86

ADLY
MOTO
6-1
6. CYLINDER HEAD / CYLINDER / PISTON
Attention of Operation
•
Can be operated when engine installed on vehicle.
•
Must cleaning before operating , avoiding dust enter the engine.
•
Remove the gasket dust stay on joint face.
•
When remove the cylinder , avoid to use screw driver to damage the joint face.
•
Avoid to damage the cylinder inner surface and piston face.
•
Cleaning before check parts, and smear motor oil appointed in sliding face before
the installation.
Diagnosis of Troubles
Low compression pressure, poor start, idle speed not stable
•
Air leakage of cylinder head gasket
•
Wear & damage the piston ring
•
Wrong installation of spark plug
•
Wear & damage the cylinder and piston
•
Inlet valve poor.
Compression pressure too high, overheating, locking
•
Piling up carbon of cylinder head or piston head.
Piston Knocking Noise
•
Wear the cylinder and piston
•
Wear the piston pin hole and piston pin
•
Wear the needle bearing of crank connecting rod (small end)
Piston ring noise
•
Wear or damage the piston ring
•
Wear or damage the cylinder