HER CHEE 2002 ATV-320 S, Руководство по обслуживанию

Страница: 8 / 125

F-8
Engine Oil
OIL LEVEL
Warm up the engine.
Stop the engine and park the vehicle on level
ground.
Check the oil level through the oil window.
If the level is near the lower of the window, fill to
the middle level with the recommended engine oil.
OIL CHANGE
NOTE
◦ Drain the oil from the crankcase while the engine
is warm.
This ensures complete and rapid draining.
Place the oil pan under the engine.
Remove the oil filler cap and oil drain plug and
drain the engine oil.
Remove the oil filter screen cap, spring and filter
screen, and clean the filter screen.
After the oil has been completely drained, be sure
the O-ring on the filter screen cap is in good
condition and install the filter screen with the
closed end facing out.
Install the spring and cap.
Torque: 18-22 N.m (13-16ft-lb)
Make sure that the sealing washer is in good
condition, install the drain plug and tighten it.
Torque: 20-25 N.m (15-18 ft-lb)
Fill the engine with recommended engine oil
through the oil filler hole.
ENGINE OIL CAPACITY:
0.8 Liter (0.85 US qt.) at change
Reinstall the oil filler cap and start the engine and
let it idle for a few minutes.
Recheck the oil level.
Check that there are no oil leaks.
Min. Level
Filter Screen
Oil Filler Cap