
Chapter I Engine
Engine Remove and Installation
INSTALLATION
•
Mounting the engine and tie-up fixed nuts with standard locking torque.
Locking torque
:
Fixed M10 nuts on bracket
:
4.0 kg-m
•
Place a floor jack under the engine. Again, be sure to protect the engine from the jack
head with a block of wood. Lift the engine to align the mounting bolt holes, then install
the brackets, bolts and nuts.
•
The remainder of installation is the reverse of the removal steps, with the following
additions:
a) Use new gaskets at all exhaust pipe connections.
b) Adjust the clutch cable and the throttle cable.
c) Fill the engine with oil. Run the engine and check for leaks.
•
Finish mounting the engine; be sure to check the throttle cable tolerance.
Use reversed procedure to setup the parts that has been removed.
NOTE
:
※
All cables and wiring has to be set into correct position