Work Chairs
Operating Instructions
HEPRO AS •
Tlf. +47 756 94 700 •
www.hepro.no
Regulations
By lifting the lever 1 the gas spring is triggered and the seat can be raised or lowered.
Lever 2 opens the seat slider and the seat can be moved forward or back.
Lever 3 has two functions. Turn back and the backrest
angle can be changed. Turn ahead 90 ⁰ and the whole
seat unit is disengaged and can be desiredly adjusted.
For models with seat rotation lever 4 is turned to open
or lock the rotation. It can be locked at every 90 ⁰.
The wheel brake is activated by pushing the brake
handle forward. Then both rotation and swivel are
locked, and the chair remains perfectly still.
Regulating the brake handle
The brake handle can be moved sideways by loosening
the two Unbraco screws holding the handle. The
handle can also be moved to the other side. The
position is locked by tightening the screws. Use the
2,5mm Unbraco key supplied with the chair. (It is
located on the right side in the center of the wheel
base).
1
4
2
3
