2
Kit
Installation note:
Of course, the assembly requires a certain technical experience. If you are not sure how to execute a determined
action, you should ask your local distributor to do it.
First, tighten all screws only loosely. After mounting all parts, the screws should be tightened to the torque specified.
This guarantees, that the product is mounted without tension.
Note
Observe the tightening torques of the motorcycle manufacturer!
Control all screw connections after the assembling for tightness!
Please notice our enclosed service information.
Tools required
Side cases
Top cases
luggage frames
Lock it system
Softbags
Aluminium luggage
Leather luggage
Protection bars
Center stands
Chopper parts
Accessories
Assembling instructions
1x
700008929
Rear rack
or
1x
700008930
Sissybar with rear rack
or
1x
700008931
Sissybar without rear rack
1x
700008932
Screw kit:
Allen key 4
Allen key 6
Allen key 8
Nut 12
Nut 14
Ratchet
2x
allen screw M10x1,25x60
2x
allen screw M8x45
2x
washer ø10,5
2x
washer ø8,4
2x
alu spacer ø18 x ø11 x 25mm
2x
alu spacer ø18 x ø9 x 22mm
2 holes each side must be drilled in the plastic side panels according to the drilling pattern
ø 20 mm
KAWASAKI Vulcan S
from date of manufacture 2015
Rear rack
item-no.: 6502524 01 01 black
Sissybar
with rear rack
item-no.: 6112524 00 01 black
Sissybar
without rear rack
item-no.: 6002524 00 01 black
Preparing:
remove the plastic side covers on the left and the
right. Cut out the drilling pattern and place it on the
inside of the cover and drill. We recommend that you
pre-drill with a small drill, control, and then expand
the bore to 20mm. Repeat with the other panel.
