hepco & becker 5052515 00 01 Скачать руководство пользователя страница 2

2

Hauptständer / Centre stand

KAWASAKI Versys 1000

Baujahr 2012-2014 / date of manufacture 2012-2014

Artikel Nr.: / Item-no.:

 

6

505

2515

 00 01 

schwarz/black

Grease all moving parts. Use liquid threadlocker to secure all screws and nuts.

Mount one side after the other, so that the handle bar position does not change !
Of course, the assembly requires a certain technical experience. If you are not sure how to execute a determined action,
you should ask your local distributor to do it. First, tighten all screws only loosely. After mounting all parts, the screws
should be tightened to the torque specified. This guarantees, that the product is mounted without tension. Observe
the tightening torques of the manufacturer! Control all screw connections after the assembling for tightness!

Alle beweglichen Teile einfetten. Schrauben mit Sicherungsmittel sichern

Die Voraussetzung für die Montage ist natürlich eine gewisse technische Erfahrung. Wenn Sie sich nicht sicher sind,
wie man eine bestimmte Arbeit ausführt, sollten Sie diese Ihrer Fachwerkstatt überlassen. Ziehen sie alle zugänglichen
Schrauben zuerst nur locker an. Nachdem alles montiert ist, werden die  Schrauben dann auf das entsprechende
Anzugsmoment festgezogen. Dadurch wird sichergestellt, dass das Produkt  spannungsfrei angebaut ist. Anzugsmomente
beachten! Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!

Vorbereitung:
Schalldämpfer  demontieren.

Befestigung Halteadapter links/rechts:
Fußrastenhalter lösen (Schrauben
entfallen)
Die Distanzbuchsen Ø12xØ8,4x5,5 mm
in die Bohrungen des Fußrastenhalters
einstecken.
Den Halteadapter zwischen Fußraste
und Rahmen mit den Zylinderschrauben
M8x 55 sowie Karosseriescheiben
Ø25xØ8,5x1,5 mm verschrauben.

Preparing:
Dismantle exhaust.

Fastening of the adapter left/right:
Dismantle the footrest holder, screws are
obsolete.
Insert the spacers Ø12xØ8,4x5,5 mm
into the holes of the footrest holder.
Fix the adapters between frame and
footrest with allen screws M8 x 55 with
washers Ø25xØ8,5x1,5 mm.

1

6x

6x

6x

LINKE SEITE
LEFT SIDE

WICHTIG
IMPORTANT

MONTAGEANLEITUNG
MOUNTING INSTRUCTIONS

Содержание 5052515 00 01

Страница 1: ...iescheiben Ø25xØ8 5x1 5mm 2 Karosseriescheiben Ø30xØ10 4x2 5mm 2 Laufbuchsen Ø28 Ø15 x 10 5 x11mm 6 Stahlbuchsen Ø12xØ9x5 5mm Hauptständer Centre stand KAWASAKI Versys 1000 Baujahr 2012 2014 date of manufacture 2012 2014 Artikel Nr Item no 6 5052515 00 01 schwarz black 1 700008273 Hauptständer 1 700008270 Halteadapter links 1 700008271 Halteadapter rechts 1 700008272 Querstrebe 1 Schraubensatz 1 7...

Страница 2: ...t sicher sind wie man eine bestimmte Arbeit ausführt sollten Sie diese Ihrer Fachwerkstatt überlassen Ziehen sie alle zugänglichen Schrauben zuerst nur locker an Nachdem alles montiert ist werden die Schrauben dann auf das entsprechende Anzugsmoment festgezogen Dadurch wird sichergestellt dass das Produkt spannungsfrei angebaut ist Anzugsmomente beachten Nach der Montage alle Verschraubungen auf f...

Страница 3: ...nden Rechts die SenkZylinderschrauben M8x16 Fastening of the cross bar between the two adapters above the muffler Left side allen screws M8x16 with washers Ø8 4 Right side use countersunk screws M8x16 2 3 2x 2x 2x 2x Fastening of the center stand Mount the special spacer with grease to the center stand from inside and outside Then fix the center stand with allen screw M10x25 and body washer Ø30xØ1...

Страница 4: ...Please check now the function of your centre stand and control all assembled screw connections for tightness HEPCO BECKER centerstands are carefully designed and tested to eliminate reductions in cornering clearance and ground clearance under most driving conditions on an unmodified stock motorcycle and are certified to be compliant with European ABE safety standards Use of any centre stand may re...

Отзывы: