HENX NUMBERAS-GZJ20, Руководство оператора

Страница: 31 / 49

WORKING TECHNIQUES
◾
Horizontal Cutting (with blade
at an angle)
Cut close to the ground from a
standing position, e.g. for trimming
low shrubs.
Swing the blade right and left as
you move along the hedge
–use
both sides of the blades and do
not rest the cutter blade on the
ground(Fig.F).
◾
Horizontal Cutting(with straight
blade)
Hold the blade at an angle of
0°to 10°as you slowly swing the
hedge trimmer horizontally.
Swing the blade in an arc
towards the outsides of the hedge
so that the cuttings are swept to
the ground(Fig.G).
Recommendation: Cut hedges that
are no more than chest height
in this working position.
◾
Vertical Cutting(with blade at
an angle)
This is useful when cutting
without standing directly next to
the hedge(e.g.,there is a flower
bed between operator and
G
F
H