HENX H40DC350, Руководство оператора

Страница: 10 / 42

10
attachment.Make sure that other personsandpetsare at least 100 ft. (30.5m) away.
▪
Always hold the trimmer firmly, with both hands on the handles, while
operating. Wrap your fingers and thumbs around the handles.
▪
Avoid Accidentally Starting
- Don’t carry the trimmer with your finger on
the trigger.
▪
Donot operate the trimmer in gaseous orexplosive atmospheres. Motors
in these appliances normally spark, and the sparks might ignite fumes.
▪
Damage to Trimmer - If you strike a foreign object with the trimmer or it
becomes entangled, stop the tool immediately, check for damage and have any damage
repairedbeforefurtheroperationisattempted.Donotoperatewitha broken guard or
spool.
▪
If the equipment should start to vibrate abnormally, stop the motor and
check immediately for the cause. Vibrationisgenerallyawarningoftrouble. Aloose
headmayvibrate,crack,breakorcomeoffthetrimmer,whichmayresult inseriousorfatal
injury.Makesurethatthecuttingattachmentisproperlyfixed inposition.If thehead
loosensafterfixingitinposition,replaceit immediately.
Never use a trimmer with a loose cutting attachment.
▪
Replace acracked,damaged orworn-out cutting headimmediately,even
if damage is limited to superficial cracks.
Such attachments may shatterat high
speed and cause serious or fatal injury.
▪
Check the cutting attachment atregular short intervals during operation,
or immediately if there is a noticeable change in cutting behavior.
▪
When replacing the cutting line, use no more than0.090in.(2.3mm) nyl on
line;
using heavier lines than recommended by the manufacturer increases the load onthe
motorandreducesitsoperatingspeed.Thisresultsinoverheatingand damage to the
trimmer.
▪
To reduce the risk of serious injury, never use wire or metal-reinforced
line orothermaterialinplaceof thenyloncuttinglines. Piecesofwire could
breakoffandbethrownathighspeedtowardtheoperatororbystanders.
▪
Toreduce the risk of injury from loss of control, never work on a ladder
or on any other insecure support. Never hold the cutting attachment above
waist height.
▪
If situations occur that are not covered in this manual, use care and
good judgment. Contact the HENX Customer Service Center for assistance.