background image

 

 

Original Instructions 

 

 

 

 

 

 

 

 

 

Note: 
 

Before using this product, read this manual and follow all safety rules 
and Operating Instructions. 

 

Intended Use 

This lawn trimmer is designed for cutting grass and similar soft vegetation in garden areas, not 
used for any other purpose.     

Safety Instructions 

WARNING! When using the machine the safety rules must be followed. For your own safety 

and that of bystanders please read these instructions before operating the machine. Please 

keep the instructions safe for later use. 

 

Training 

a) Read the instructions carefully. Be familiar with the controls and the correct use of the 

machine.   

b) Never allow children or people unfamiliar with these instructions to use the machine. Local 

regulations can restrict the age of the operator.   

c) Keep in mind that the operator or user is responsible for accidents or hazards occurring to 

other people or their property.   

Preparation 

a) Before use check the supply and extension cord for signs of damage or aging. If the cord 

becomes damaged during use, disconnect the cord from the supply immediately. DO NOT 

TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the machine if the cord 

is damaged or worn.   

b) Before use, always visually inspect the machine for damaged, missing or misplaced guards 

or shields.   

c) Never operate the machine while people, especially children, or pets are nearby.   

d) Children should be supervised to ensure that they do not play with the appliance. 

 

Содержание H20DC250














Отзывы: