2
IV.
Operation Steps
1. Reset
you shall initialize the safe when you use it in the first time or delete all the fingerprints. Please
press the initialization button on the back, when you hear one sound: "di-", please keep
pressing, until one long sound: "Di---" and the LCD will display "dELEtE", it means the
initialization is successful.
2. How to Add a valid Fingerprint
A. Take off the Mechanical Key Cover, insert the key and turn it to open door.
B. The LCD and the sensor turn on, the LCD will display ¡Add¡. Please login finger .
C. Put a finger on the sensor.
D. After hearing a sound ¡Bi---¡, take away the finger
。
E. Put the finger on the sensor again
。
F. After hearing a long sound ¡Bi--------¡, the finger added successfullys
，
and the LCD will
dispay the finger number
。
3. lock and unlock
Put a finger on the fingerprint, if it is valid .the safe will open or lock ,and LCD display "open"
or "close".
4.
Alarm
Invalid Finger Alarm:When the safer is locking, use a invalid finger to unlock it or a finger
verifies fail 10 times continuously, the safer will alarm 1 minute to show that there is some one
want to open it without authorization. After 1 minute, the safer will not accept any finger in 30
minutes.
Overtime alarm: when the keeping opening for 3 minutes, the safe will alarm to remind the
user to close it. Close it or use the mechanial key to terminate the alarm.
Low Voltage Alarm:When the voltage is under 4.2V ,if you open or lock the door,it will alarm.
5. Connect to PDA
The safer can connect to the PDA to enhance its function. The enhancing functions are
：
Set Clock
Check Clock
Download the unlocking record.
External power supply in urgence.
