Hensel-Visit ULTRA E Series, Руководство пользователя

Страница: 11 / 14

Bedienungsanleitung / User manual Ultra IV / Ultra E Softboxen
HENSEL-VISIT GmbH & Co. KG
11
The Velcros may be loosened for ventilation purposes.
The Softbox must not be mounted to flashlight units from
other manufacturers.
Mounting to the flashlight unit
For attaching Softboxes to a Hensel flashlight unit the
holding clamps of the reflector quick-change mechanism
must be unlocked. For doing this, the lever of the reflector
quick-change mechanism has to be shifted to the left side
until having reached stop position. Now the Softbox has to
be attached plain and even. Please avoid any tilting or
canting. For attaching, the lever has to be shifted right
until locking. The lock avoids any unintentional shifting.
For loosening, please hold the Softbox (
Attention - the
attached item could be very hot! ), push the lever forward
and then shift it to the left for opening.
It must be ensured that the Softbox is held safely to
prevent it from falling down. In the case of falling
down, the heavy weight of the Softbox and the solid
metal rear can cause serious damage to the flashtube
(danger!).
Mounting
Picture 1:
Spread the black/silver coated fabric out with
the silver side up.
Picture 2:
The EH and MH Adapter, resp., is to be fixed to
the metal rear by using the knurled screws
(Ultra IV Softbox only) and placed in the center
onto the heat shield so that the wide opening
faces you.
Then insert the metal rods into the appropriate
boreholes of the metal rear as far as it will go.