10
HEATSEALER
2000
ALARMS
The HEATSEALER 2000 Thermal Sealer is equipped with a signaling system that uses acoustic and visual
indications to alert the operator and simplify the service activity.
In case of alarm both the yellow and green indicators will flash.
Table of Alarms
Alarm code
Cause
1 flash
Break of the probe
2 flashes
Short circuit of the probe
3 flashes after 10 seconds from START
The resistance does not heat up
4 flashes
Fault in the double safety circuit (it appears at the
start of the cycle)
In case of alarms call the Service.
MAINTENANCE
The appliance does not require any ordinary maintenance.
To wash the outside of the appliance, use a damp cloth after making sure that the power supply cable
has been unplugged.
For an extra maintenance call the Service.
