Henriksen Giraffe Tracer, Руководство пользователя

Страница: 27 / 52

USER MANUAL
Giraffe Tracer
Rev.: -12 page 27 of 52 M000375
• Add a thin layer of Super Lube Teflon oil on the outside of the
pole, and clean/wipe the outside of the pole completely dry.
• Inspect the inside of the pole. Look for damage, marks and
foreign objects.
• Inspect and lubricate the O-rings with Molykote 111. Replace the
O-rings if they appear to be damaged.
•
Assemble the poles. The guidance grooves must point to the
guidance unit.
•
Use new bolts (M4 x 6 mm) to attach the 3 internal collars.
• Always test (extend) manually - without the relief valve - that the
sections are correctly assembled before testing with pressurized
air. This to ensure that the guiding is working properly and that
the poles are correctly assembled.
•
Assure that the hook attachment is in line relative to the
guidance unit. Use new bolt (M4 x 8 mm) when assembling.
•
Add a thin layer of Quicksilver Marine Lubricants on the top
mount assembly and the bottom sleeve assembly.
•
Mount the end section. Push the outside bearings gently in until
the holes are in line. Use the guiding pin to align the holes.
•
Screw all bolts (M4 x 8 mm) halfway in before tightening with
moderate hand force.