10) Thread the smaller
barbed adapter into the
top of the pump.
Thread the
remaining,
larger
barbed
adapter into the
back wall of the
highest dish as
shown. Push
the water tube
onto both barbed
adapters
.
11) Read your
pump and light
instructions.
Fill the bottom bowl with water. Then plug in the pump and connect to the light transformer to
enjoy your fountain. If the pump does not immediately begin working, there may be an “airlock”
within the impeller chamber. Simply unplug and plug in a few times and it should start
.
csd
9/2020
IMPORTANT – WINTER CARE
Winter ice build-up can cause damage to concrete statuary. Follow
these tips to reduce winter weathering to your fountain:
* Disconnect power to pumps and lights.
* Remove plugs/stoppers/standpipes in all fountain bowls to open
drains and let all moisture out. Keep drains open throughout winter.
* Cover with a Henri fountain cover. Keep tight and do not let snow
or water collect in sagging areas.
* Do not allow snow or ice to build up on or against the concrete.
Remove snow before it turns to ice. Do not use antifreeze, salt or
chemical ice removers as these may damage concrete.
Online Resources
Products
:
www.henristudio.com/products
FAQs:
www.henristudio.com/faq
Warranty:
www.henristudio.com/warranty
Contact :
www.henristudio.com/contact-us
Caution: The use of Chlorine or Chlorine Bleach or water
coloring additives may damage the finish of your fountain.
