Henny Penny OE 301 Скачать руководство пользователя страница 112

Страница: 112 / 154

Henny Penny

Model OE/OG 301/302/303

SECTION 7. PARTS INFORMATION

7-1. INTRODUCTION

This section identifies and lists the replaceable parts of the Henny

Penny 3-Well Open Fryer.

7-2. GENUINE PARTS

Use only genuine Henny Penny parts in your unit. Using a part of

lesser quality or substitute design may result in unit damage or

personal injury.

7-3. WHEN ORDERING PARTS

Once the part you want to order has been found in the Part List,

write down the following information:

1. From the exploded drawing and Parts List (Sample)

Item Number

Part Number 43768

Description

On/Off Switch

2. From the data plate (Sample)

Product Number

01400

Serial Number

00100

Voltage

208

7-4. PRICES

Your distributor has a price parts list and will be glad to inform you

of the cost of yours parts order.

7-5. DELIVERY

Commonly replaced items are stocked by your independent Henny

Penny distributor and will be sent out when your order is received.

Other parts will be ordered by the distributor from Henny Penny

Corporation. Normally, these will be sent to your distributor within

three working days.

7-6. WARRANTY

All replacement parts (except lamps and fuses) are covered under

warranty for 90 days against manufacturing defects and workman-

ship. If damage occurs during shipping, notify the carrier at once so

that a claim may be properly filed. Refer to the warranty in this

manual for other rights and limitations.

Recommended replacement parts, stocked by your distributor, are

indicated with

√

in the parts lists. Please use care when ordering

recommended parts, because all voltages and variations are

marked. Distributors should order parts based upon common

voltages and equipment sold in their territory.

206

7-1

7-7. RECOMMENDED

SPARE PARTS FOR

DISTRIBUTORS

Содержание OE 301



























































































































































Результаты поиска

Содержание OE 301

Отзывы:

Henny Penny OE 301, Руководство по обслуживанию, Страница: 112 / 154

Результаты поиска

Содержание OE 301

Отзывы: