Model MP-941/942/943/944
SECTION 2. INSTALLATION
2-1. INTRODUCTION
This section provides the installation instructions for
the Henny Penny Multipurpose Holding Cabinet.
Installation of this unit should be performed by a
qualified service technician.
Do not puncture the skin of unit with drills or
screws as component damage or electrical shock
could result.
2-2. UNPACKING
The Henny Penny Multipurpose Holding Cabinet has been
tested, inspected, and expertly packed to ensure arrival at
its destination in the best possible condition. The cabinet
rests on cardboard pads that sit on a wooden skid. The unit
is then packed inside a heavy cardboard carton with
sufficient padding to withstand normal shipping treatment.
Any shipping damages should be noted in the
presence of the delivery agent and signed prior to
his or her departure.
To remove the unit from the carton, you should:
1. Carefully cut banding straps.
2. Lift carton off the unit.
3. Lift the unit from the cardboard pads and skid.
Take care when lifting unit to prevent personal
injury. The units can weigh as much as 278 lbs.
(126
kg).
203
2-1
