Henny Penny LVE-202, Техническое руководство

Страница: 9 / 115

T
roubleshooting
1
C Ch ha ap ptte err 1 1 T Trro ou ub blle essh ho oo ottiin ng g
1 1..1 1 IIn nttrro od du uccttiio on n
This section provides troubleshooting information in the form of an easy to rear table.
If a problem occurs during the first operation of a new fryer, recheck the installation
per the Installation Section of Operator’s Manual.
Before troubleshooting, always recheck the Operating Section of Operator’s Manual.
1 1..2 2 T Trro ou ub blle essh ho oo ottiin ng g G Gu uiid de e
To isolate a malfunction, proceed as follows:
1 1))
Clearly define the problem (or symptoms) and when it occurs.
2 2))
Locate the problem in .
3 3))
Review all possible causes. Then one-at-a-time work through the list of
corrections until the problem is solved.
4 4))
Refer to the maintenance procedures in to safely and properly make the
checkout and repair needed.
If maintenance procedures are not fol-
lowed correctly, injuries and/or property
damage could result.
T Ta ab blle e 1 1--1 1 T Trro ou ub blle essh ho oo ottiin ng g G Gu uiid de e
Problem Cause Correction
POWER
switch on
but fryer
completely
inoperative. Open circuit.
• Check to see that unit is plugged in.
• Check breaker or fuse at supply box.
• Check voltage at wall receptacle
• Check main power switch; replace if defective.
• Check cord and plug.
• Reset circuit breakers in fryer.
• Reset transformer circuit breaker.
Oil will not
heat. Blown or tripped
fuse. Reset circuit breaker or replace fuse at supply box or con-
trol panel.
Faulty power
switch. Check power switch per 7.8 Main Power Switch , page 44 .
Faulty cord and
plug.
• Check cord and plug.
• Check power at receptacle.