Maintenance Filter & Fryer Vat Cleaning
(continued)
FM08-169-C
©McDonald’s Corporation · Planned Maintenance Manual · Revised February 2014
Page 2 of 3
Henny Pen
ny
Corp
.
Low Oil V
olume Fryer-Gas
L
VG-202; L
VG-203; L
VG-204
Daily FR
06
D01
6
Scrub inside vat
Attach the Pad to the Hi-
Temp Pad Holder and
moisten with shortening.
Sprinkle KAY® QSR Fryer
Cleanser on the Pad. Scrub
the walls, corners and bottom
of the inside of the vat. Use
the Hi-Temp Detail Brush to
remove soil built up and
debris from burner tubes,
corners and bottom of vats
and other hard-to-reach areas.
Be careful not to damage the
sensing probes or high limit.
KAY® QSR Fryer Cleanser
7
Scrub complete
Once the vat is clean and
display shows SCRUB
COMPLETE? press
button
for YES. Display shows
WASH VAT? along with
YES NO.
8
Washing
Press
button for YES and
display shows WASHING.
Oil is circulated through the
vat.
9
Wash again
Once wash cycle is complete,
display shows WASH
AGAIN? along with YES
NO. If vat is not yet clean,
press
for YES and step 9 is
repeated.
10
Rinsing
If vat is clean, press
X
for NO
and RINSING shows in
display. The oil is pumped
into the vat and rinses it.
11
Rinse again
Once completed, the display
shows RINSE AGAIN?,
along with YES NO. If vat is
not yet clean, press
for YES
and step 11 is repeated.
12
Polish
If vat is clean, press X for NO
and POLISH show in display,
along with YES. Press
button for YES and the oil is
circulated through the filter
system for 5 minutes.
13
Fill vat
Once the polish cycle is
complete, FILL VAT shows
in display, along with YES.
Press
button for YES and
display shows FILLING and
the vat fills with oil.
14
Back to normal operation
Once vat is full, display
shows IS POT FILLED?
along with YES NO. Press
button for YES and fryer
returns to normal operation.
15
Power switch on
Make sure the main power
switch is in the ON position.
If the filter pad has not been
changed, a reminder
“CHANGE PAD” shows on
the display. Press #1 button
to cancel the message, but it
reappears every 4 minutes
until the filter pad has been
changed.