background image

SECTION 1. INTRODUCTION            

1-1.  HEATED DISPLAY  

The Henny Penny Heated Display Cabinet is a basic unit of food 

 

CABINET 

processing equipment used to display the food product and  

 

 

maintain the temperature of hot foods in the commercial food  

 

 

service operation. This highly efficient, quality-built cabinet will  

 

 

keep hot foods at proper holding temperatures  

 

 

The Henny Penny Heated Display Cabinets have see- 

 

 

thru doors which allow viewing and access to the hot foods from  

 

 

both front and back. 

 

1-2.  FEATURES

 

 • 

Easy to keep clean 

 • 

DCW-2 holds two trays 

 • 

All heat sources are adjustable 

 • 

Flip-up, see-through door panels 

 

1-3.  PROPER CARE 

 

As in any unit of food service equipment, the Henny Penny  

 

 

Heated Display Cabinet does require care and maintenance.  

 

 

Requirements for the maintenance and cleaning are contained  

 

 

in this manual and must  become a regular part of the  

 

 

operation of the unit at all times. 

 

1-4.  ASSISTANCE 

 

Should you require outside assistance, just call your local  

 

independent Henny Penny distributor in your area, call Henny 

 

Penny Corp. at 1-800-417-8405 toll free or 1-937-456-8405,  

 

or  go to Henny Penny online at www.hennypenny.com.

 

 

 

1-5.  SAFETY 

The only way to ensure safe operation of the Henny Penny  

 

Heated Display Cabinet is to fully understand the proper installation,  

 

operation, and maintenance procedures. The instructions in this  

 

manual have been prepared to aid you in learning the proper  

 

procedures. Where information is of particular importance or is  

 

safety related, the words NOTICE, CAUTION, or WARNING  

 

are used. Their usage is described below. 

 
 

 

 

 

           

 

 

 

SAFETY ALERT SYMBOL is used with DANGER,        

 

 

WARNING, or CAUTION which indicates a personal  

  

injury 

type 

hazard. 

 

 
 

 

NOTICE is used to highlight especially important  

  

information.

  

 

 

Содержание DCW-2



















Отзывы: