Model 8000 Computron
1-3. OPERATING CONTROLS
Refer to Figure 1-1.
Fig.
Item Description
Function
No. No.
1-1
1
Lights when the control calls for heat; the elements or
burners come on and heat the shortening
1-1
2
Digital Display
Shows all the functions of the Cook Cycle, program modes,
diagnostic modes, and alarms
1-1
3
Lights when the solenoid closes and pressure starts to build
inside
frypot
1-1
4
Flashes when the shortening temperature is NOT at the
proper temperature for cooking product
1-1
5
Lights when the shortening temperature is 5
°
F (3
°
C) below
to
15
°
F (9
°
C) above the cooking temperature, signaling the
operator that the shortening temperature IS at the proper
temperature for cooking product
1-1
6
Press to display the following fryer information and status:
a. The temperature of the shortening
b. The temperature setpoint
c.
Filter
status
d. The number of times filtered today
e. The average no. of filters per day
f. No. of times Cook Cycle was stopped early today
g. No. of times Cook Cycle was stopped early in past week
e. Oil Life Display (Only if “Change Oil” feature is enabled)
f. Date and time
If pressed in the Program Mode, shows previous settings;
pressing this along with accesses the Information
Mode which has historic information on the operator and
fryer’s
performance
1-1
7 & 8
Used to adjust the value of the currently displayed setting in
the Program modes
1-2
1005
