©
Copyright 2016 by Henning GmbH & Co. KG
Rev. 2.1 09/2016
15
12. Operation Instructions in Brief
1.) Install the unit at an appropriate place.
2.) Calibrate with empty cabin
By
navigate to menu-item
select sub-item
and confirm by
. The preset standard (see
) is
(0% cabin load, i.e. empty
cabin). After setting the last digit, the whole figure will be flashing until you
confirm it by pressing
. After that a countdown will be running from
to
. At
the current weight of the cabin will be
measured. At that moment there mustn’t be anybody in the cabin or on the car
roof , in order not to warp the measurement. Furthermore make sure that you
didn’t leave any tools in the cabin or on the car roof, nor any other things that
don’t belong there during normal operation.
3.) Calibrate with loaded cabin (nominal load)
By
navigate to menu-item
select sub-item
and confirm by
. Now you can adjust on the display an arbitrary load that you will load into
the cabin. Unless you changed the preset menu-item
, you will have to
enter the load in terms of percentage, i.e. 100% (
), if you load the
nominal load, or 75% (
), if you load ¾ of the nominal load for example.
After setting the last digit, the whole figure will be flashing until you confirm it by
pressing
. After that a countdown will be running from
to
. At
the current weight of the cabin (including load!!) will be measured. At
that moment there mustn’t be anybody in the cabin or on the car roof , in order
not to warp the measurement. Furthermore make sure that you didn’t leave any
tools in the cabin or on the car roof, nor any other things that don’t belong there
during normal operation, except the load for calibration.
4.) Adjust the alarm limits (see item 10)
By
navigate to the alarm limit and confirm by
. Scroll by
to the
value desired, then press
to adjust the state-changing limit. Press
2
times to confirm the adjustment.
5.) Connect the control lines to the lift controller and make sure that you
accordingly choose the make- resp. break-contact.
Содержание MultiRope Series
Страница 1: ...Operating Manual MULTIROPE ...
Страница 16: ... Copyright 2016 by Henning GmbH Co KG Rev 2 1 09 2016 16 ...
