Henkelman Atmoz, Руководство пользователя, Страница: 36 / 80

Operation 36
5. Press the – / STOP button and the + / VACUUM STOP button to adjust the value of Liquid
.
When setting a value, a dot will appear in the bottom right of the parameter display.
6. Press the REPROG button to activate the new parameter.
The function display will stop flashing.
6.7.1.7 Red Meat (optional)
The Red Meat option is especially designed for the packaging of fresh meat. Degassing the
product during the vacuuming process may result in the formation of air pockets inside the
package. The Red Meat option prevents degassing of the product during and after the sealing
phase.
The Red Meat option can be set for each program individually. If the Red Meat option is enabled in
a program, it will not be possible to enable the Soft-air option in that program.
When selecting this option, a parameter to set the "expansion reduction time" will appear. This is
indicated by a flashing LED in front of the Soft-air option in the function display. It is recommended
not to change this setting. Please contact your supplier for this.
To enable the Red Meat option on your machine, please contact your supplier.
6.7.1.8 Multi-Cycle Vacuum (optional)
The Multi-Cycle Vacuum option allows you to vacuum and insert gas in up to 5 steps. This
provides an additional reduction in the oxygen content. This function is useful only for very specific
applications, which set very special demands on the residual oxygen content or the maximum
allowed vacuum. This option will not result in any appreciable benefit in the food industry.
To enable the Multi-Cycle Vacuum option on your machine, please contact your supplier.
1. Press the PROG 0 – 9 button to select the program for which you wish to set Multi-Cycle.
2. Press the REPROG button to select the programming mode.
The function display will start flashing.
3. Use the Cursor key to scroll to the parameter Vacuum.
The LED in front of the selected function will light up.
The right-side character of the parameter display indicates which vacuuming step you are
programming.
4. Press the – / STOP button and the + / VACUUM STOP button to adjust the value of Vacuum.
5. Use the Cursor key to scroll to the parameter Gas.
The LED in front of the selected function will light up.
6. Press the – / STOP button and the + / VACUUM STOP button to adjust the value of Gas.
7. Repeat steps 3 and 4 if an additional vacuuming step is desired.
8. Press the REPROG button to activate the new parameter.
The function display will stop flashing.
6.7.1.9 Seal
This is the time that the sealing wire and/or the cut-off wire are heated. The longer the time, the
more heat is transferred to the bag.