Henkel Teroson 142241, Руководство по эксплуатации

Страница: 7 / 14

7
12) Recognizing the position of the
adjusting knobs
The handle of the pistol has projections 2.5
mm in height. These correspond exactly to a
full rotation of the thread. The grooves on the
adjusting knobs show the position. When the
knob is open, the groove is above the
projection. When the knob is closed, the
groove is below the projection.
13) Multifunctional use
Conventional 300ml cartridges can be fixed
in position with the black nozzle cap. The
blue adjusting knob remains closed during
application.
14)
The red adjusting knob regulates the
pressure on the cartridge piston.
For plastic cartridges, a pressure of only 2-3
bar is required. If it is not possible to reduce
the input pressure, the red adjusting knob
must be closed almost entirely so as to
prevent the material from spilling over the
cartridge piston.
Notice
These instructions correspond to the present
state of development and are not to be taken
as comprehensive. The best safeguard
against possible malfunctions- for which we
accept no liability- is to conduct one’s own
trials. Variations regarding application,
working procedure and material require an
adaption of the application conditions.