HAIC-N Series
14
1.4.12 Recalling the Preset Piece Weight
1.4.12.1 The scale should be in the normal weighing mode before the user can recall the piece
weight from memory, enter the location via numeric key which will be recalled (ex. 19)
1.4.12.2 Then press
PRESET APW
key to recall the piece weight, display will shows as ff.
Recalling location
Recalling piece weight Confirming to load data
1.4.12.3 Press
PRESET APW
key to load the piece weight from memory, then back to APW or
SMPL mode.
1.4.12.4 Press
Clear
key to cancel the load process, then back to normal weighing mode.
Note: If the location chosen has the previous data, the new data will over write the old one
1.4.12.5 If the location chosen has no data, display will shows as ff. for 3 seconds then back to
normal weighing mode
Recalling location
