eXtendo®
XF
Thermal Printer Family
Part No. D-684-399
Mod. No. 4 120322 Eli
page 32 of 35
11
Technical Specifications
Technology:
Direct Thermal
Resolution:
203 dpi (8 dots/mm)
Paper Weight:
50 to 120 g/m²
(Twincut cutter; partial/full cut model)
50 to 160 g/m²
(Twincut cutter; full cut only model)
Cutter:
Hengstler Twincut Guillotine Type, full or partial cut
1.5 mio cuts
Data Interfaces:
a) USB 2.0 industrial
Transmission rate: 1.5 Mbit/sec and 12 Mbit/sec
b) RS-232
4,800 to 115,200 baud
Data cable length (any) max 3 meters.
DC supply cable length max. 3 meters.
No DC building power supply; compare warnings in
section
11.1 Electromagnetic Compatibility
Any receiver inputs < 13.2 Volts
Bar Codes:
UPC-A, UPC-E, EAN-13, EAN-8, Code 39, Interleaved 2 of 5, Code 128,
Codabar
2D: PDF417, QR Code, Datamatrix, Aztec
Minimum Print Length:
15 mm. Note: At least 40 mm should be printed in order for the
paper to be visible. Down to 15 mm ticket length is possible to allow
for applications where the printer is used without or a chute and
where very short printouts are dropped into a bin or similar
conveyance.
Temperature Range
Operating:
-25°C to +65ºC 20% to 85% RH non-condensing
Storage:
-30ºC to +75ºC
(versions with coated pcb upon request)
Printhead Life
Abrasion:
150 km of paper (
based on 12.5% print density)
Electrical:
150 million dot pulses
Paper Roll Capacity:
Optional Roll Holder with up to 200 mm roll diameter and 1 inch
spindle
Graphic Driver:
Windows® 7/8/10, Linux (CUPS, ARM, 64-bit)
Firmware:
Field uploadable firmware, configuration, character sets, predefined
graphic images
Approvals:
CE, UL E174318 (pending)
Print Speed:
24 VDC: up to 250 mm/sec (13.7 ips) max.
12 VDC: up to 130 mm/sec (5.1 ips) max.
Paper Width:
54-60 mm (2.12 to 2.36 inches)
As an option a pair of paper guides is available for a 54 mm setup
(e.g., credit card formats)
