Hendi SALAMANDER 264119, Руководство пользователя

Страница: 6 / 52

6
EN
Use
• Connect the plug with an electrical socket.
• Place the crumb tray in the appliance.
• Rotate the temperature dial (lower dial) to start
heating.
• The orange light will go on until the desired tem-
perature is reached.
• Rotate the timer to the desired time.
• The green light will go on until the desired time
is reached.
Note: The orange light might go on when the tem-
perature drops, the machine will start reheating till
the desired temperature is reached again.
Cleaning and maintenance
• After use, unplug the appliance from the power
socket and let it cool down.
• Clean the inside and outside of the body, grid and
crumb tray with luke-warm water, a mild deter-
gent and a soft cloth. Don’t clean the heating el-
ements.
• Use a brush to remove any encrustations from
the grid.
• Dry all parts with a dry cloth before storing the
salamander.
• Note! Do not clean the appliance with aggressive
chemicals or abrasives in order to prevent dam-
age to the surface.
Trouble shooting
If the appliance does not function properly, please check the below table for the solution. If you are still unable
to solve the problem, please contact the supplier/service provider.
Problem Possible cause Solution
Turn temperature dial in the off posi-
tion and power light stays on
Fuse broken Contact the supplier.
Power is connected but the salaman-
der doesn’t heat up.
Check if the overheating protector is
malfunctioning
Contact the supplier.
Indicator light doesn’t work while the
salamander is heating up.
Indicator light not connected Contact the supplier.
Indicator light broken Contact the supplier.
Technical specifications
Item 264119 264201 264300
Operating voltage & frequency 220-240V~ 50/60Hz
Rated power 2000W 2200W 3600W
Protection class Class I
Waterproof protection class IPX4
Timer setting range 30 mins
Temperature setting range 50 °C to 300 °C
Remarks: Technical specification is subjected to change without prior notification.