Hendi 860083-860304, Инструкция пользователя

Страница: 7 / 16

To use :
Fill the tank with sufficient water. Empty trays should just float.
Use the thermostat knob to set the desired power level.
Important :
Always ensure that there is sufficient water in the tank! Check this regularly, also during use.
Maintenance advice:
Always remove the plug from the power point before cleaning.
If used intensively, regularly remove lime scale from the bottom of the water tank
Never immerse the appliance in water or any other cleaning fluid
Clean the appliance with a damp cloth
Never use aggressive or corrosive cleaning agents
Avoid as much as possible water contacting the electrical components
Faults:
Technical data
Voedingsspanning 230~240 VAC/50 Hz
Stroomverbruik 435W
Guarantee
Any defect affecting the functionality of the appliance which becomes apparent within one year of its
purchase will be corrected by free repair or replacement provided that it has been used and
maintained in accordance with the instructions and has not
been abused or misused in any way. Your statutory rights are not affected. If it’s
under guarantee, state where and when it was bought, and include proof of purchase (e.g. till
receipt).
In line with our policy of continuous product development we reserve the right to change product,
packaging and documentation specifications without notice.
Discard
At the end of the life of the appliance, please cast of the appliance according to the on that moment
applying regulations and guidelines.
Fault Possible cause Possible solution
Appliance does not work
No power at the power point Check the fuse
The plug is not plugged (correctly)
into the power point
Check the plug
Appliance does not reach
the set temperature
Heating element faulty Contact the supplier
Control unit faulty Contact the supplier
Heating element fuse faulty Contact the supplier