6
EN
Preparing food in the microwave
Select the desired power level by pressing ‘POWER LEVEL’.
• For high power, press once.
• For medium power, press twice.
• For defrost, press three times.
The selected power level is displayed.
HI: high power
MED: medium power
DEF: defrost
Use the number buttons to select the desired time:
For example, for 2 minutes, press ‘2-0-0’. When you have set the desired time and power, press ‘START’
Cooking food in stages
This microwave allows you to prepare food in up to three stages. For example, frozen foods should be de-
frosted before being cooked. How do you do this?
1. Select the desired power level by pressing ‘POW-
ER LEVEL’. The selected power level and the
number of the step you selected are shown on
the display.
2. Use the number buttons to select the desired
time.
3. For step 2: repeat the above
4. For step 3: repeat the above again
5. When you have selected the desired steps, press
‘START’
Use of auto cook menus
This microwave has 20 auto cook menus. To select
one of these menus the microwave must be in the
stand-by mode. Press a number key or press the
‘X2’ button and then a number button.
The number buttons are set as follows:
1
2
3
4
5
6
7
8
9
0
Memory key
0’10”
0’20”
0’30”
0’45”
1’00”
1’30”
2’00”
2’30”
3’00”
3’30”
X2 + memory key
0’20”
0’40”
1’00”
1’30”
2’00”
3’00”
4’00”
5’00”
6’00”
7’00”
Programming the auto cook keys
You can also programme these keys yourself. The memory keys can be pre-programmed for a series of
cooking stages. The programmes under the ‘X2’ button can only be set for cooking in one stage.
Preprogramming auto cook menu with more than one stage
1. Press the ‘PROG’ button.
2. Press the number button where you want to save
the preprogrammed menu.
3. Select the desired power level by pressing ‘POW-
ER LEVEL’
4. Use the number keys to select the desired time.
5. To programme more stages, repeat steps 3 and
4.
6. Once you have finished programming, save by
pressing ‘PROG
Preprogramming auto cook menu with one stage
1. Press the ‘PROG’ button.
2. Press the ‘X2’ button.
3. Press the number button where you want to save
the preprogrammed menu.
4. Select the desired power level by pressing ‘PO-
WER LEVEL’
5. Use the number keys to select the desired time:
6. Once you have finished programming, save by
pressing ‘PROG’
