Tools Required
Tape measure
Posidrive screwdriver
Spirit Level
Easyclose Door Closer x 1
Flex Bracket Base Plate x 1
T-Screw x 1
(for fixing Flex bracket
to the base plate)
Long Screw
A
x 2
(for mounting door closer)
Screw
A
x 2
Short Screw
B
x 3
(for mounting base plate)
Flex Bracket x 1
The Easyclose door closer uses pneumatic technology to automatically keep your door closed.
The standard length of retracted closer body is 28”/70cm, with maximum travelling of 50”/125cm, suitable for most width doors.
IMPORTANT information before installation
4
The closing performance of Easyclose is affected mainly by the door’s rolling efficiency.
4
If the rolling efficiency is not smooth enough the Easyclose may not show its best closing performance.
4
A top rolling system on doors is smoother than floor track doors, enhancing the Easyclose performance.
Move the door to the closed position and install the closer on the top jamb of the door
with the 2 long screws supplied, ensure the unit is level in the horizontal plane.
Contents of the Kit
1, Install the closer unit - See Appendix A for possible fitting options
Easyclose 100kg
FITTING INSTRUCTIONS - NOTICE DE POSE - MONTAGE HANDLEIDING - MONTAGEANLEITUNG
ISTRUZIONI DI MONTAGGIO - INSTUCCIONES DE MONTAJE
1270mm/50”
711mm/28”
