HENDEN H3 POWER SUPPLY
BASIC OPERATION
• Plug the Power Supply into an electrical outlet.
• Press the ON button. The LEDs will turn on
and the robot will start to operate. If no
programme is selected, the robot will perform
a single cleaning cycle. The Power Supply will
turn off automatically after 3 hours.
• You can programme the Power Supply at any
time. See the relevant section below for more
details on each program.
*Bluetooth is not available for this model.
WEEKLY TIMER
Your robot has a weekly
timer feature that enables
you to set an automatic
cleaning schedule for the
week ahead.
When the power supply is switched on, you can
press the weekly timer button to select one of
the following cleaning schedule options for the
week ahead:
One click – The robot will automatically
work every day for a full cycle,
that is, once a
day for 7 days.
Two clicks – The robot will automatically
work every alternate day for a full cycle,
that is, 4 times in a week.
Three clicks – The robot will
automatically work every 3 days,
that is, 3 times a week.
After selecting one of the above options, the
robot will start to operate at the next occurrence
of the programmed start time.
Note: A fourth click will cancel the cleaning
schedule programme (without a visible
indication).
If the robot is working in the weekly timer mode,
the weekly timer button constantly blinks between
cycles. At the end of the week, the power supply
automatically switches off and you need to
reschedule the robot.
1
2
3
Register your product online:
www.hendenpools.com.au/productregistration
ON/OFF
WEEKLY TIMER
1
2
3
