Charging
•
Rechargeable AA batteries: Charge separately according to instructions for batteries used.
•
HemoCue Rechargeable Battery: Charge in the analyzer (connected to an electrical outlet
or a computer).
5 Start-up
1.
Place the analyzer on a horizontal and stable surface.
2.
Press and hold on/off button until all display segments
show. Release, and wait a few seconds until the analyzer is
in Ready State.
For display animations, see section 3.
To make sure all measurement result segments on the display are working
properly, continue pressing the on/off button during start-up. To compare,
see section 3.
6 Turn Off
1.
Press and hold on/off button until the analyzer is in Busy
State. Release, and wait for the analyzer to turn off.
When changing settings (in section 7) or viewing previous results (in
section 13), it is not possible to turn off the analyzer. If needed, exit the
settings or previous results, and then turn off.
Power Save
If not in use, the analyzer automatically turns off after a period of time.* Analyzers supplied by
power from HemoCue Rechargeable Battery will not turn off during charging.
Power Supply
Power Save Time (default)
batteries
5 minutes
USB cable
30 minutes
* To change this setting, see section 14.
5