manualshive.com logo in svg

Hemisphere GPS Crescent Vector H220, Руководство интегратора

Поделиться
Скачать
Hemisphere GPS Crescent Vector H220 Скачать руководство пользователя страница 11

H220 Integrator Guide 

Chapter 2 – Board Overview 

Page 7 of 28 

 

 

 

Board Overview 

 

H220 OEM Board Key Features 

 

With small form factor, low power consumption, and simple on-board firmware, the H220 is an 
ideal solution for integrators, offering scalability and expandability from L1 GPS with SBAS to 
multi- frequency GPS, GLONASS, BeiDou, Galileo and QZSS (with RTK capability). 
 

 

 
 
 
H220 is offered in the H200 form factor (109L x 71W mm) with integrated L-band. The reliable 
positioning performance of H220 is further enhanced by RTK, Atlas corrections, aRTK, and 
TRACER™ technology.  The dual antenna H220 provides fast accuracy heading and with on-
board gyro and tilt sensor continues to provide heading during short GNSS outages. 
 
With multi-GNSS RTK experience centimeter level accuracy and fewer RTK dropouts in 
congested environments, faster reacquisition, and more robust solutions due to better cycle slip 
detection. 

 

Содержание Crescent Vector H220




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды