Hema 80.07.0028, Инструкция по эксплуатации

Страница: 22 / 42

- 21 -
PARTS DESCRIPTION
1. Air outlet
2. Power switch (750W; 1250W; 2000W)
3. Fan switch
4. Thermostat
5. Air inlet
6. Handle
7. Feet
OPERATION OF THE HEATER
Note: When the heater is turned on for the first time, or when it is turned on after a longer period of storage, it
is normal that the heater may emit some smell and fumes. This will disappear when the heater has been on a
short while.

Set the thermostat to the minimal position and insert the plug to the power supply.

Turn on the power switch: 750W, 1250W, 2000W.

Turn the thermostat knob in a clockwise direction to the max position.

Once the room temperature has reached the desired value, turn the thermostat knob slowly in anti-
clockwise direction until you hear a "click" sound; this is the setting temperature.

The appliance will automatically maintain the setting temperature. It will switch on when the room
temperature is below the setting, and switch off if it is above the setting.
CONVECTOR HEATER WITH THERMOSTAT AND FAN
This heater incorporates an internal fan, to be switched independent from the heating elements.
Press the switch
to turn on the fan. The fan will only operate with the thermostat in the on position. It can
be used when the heating elements are on to blow warm air into the room. In warm conditions the fan can be
used with the heating elements off to blow cool air into the room.
CLEANING THE HEATER
Always un-plug the heater from the wall socket and allow it to cool down completely before cleaning. Clean the
outside of the heater by wiping with a damp cloth and with a dry cloth. Do not use any detergents or abrasives
and do not allow any water to penetrate the heater.
STORING THE HEATER
When the heater is not used for a long time it should be protected from dust and stored in a clean dry place.
RECYCLING
This product bears the selective sorting symbol for waste electrical and electronic equipment
(WEEE).
This means that this product must be handled pursuant to European Directive 2012/19/EU in
order to be recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment
and human heath due to the presence of hazardous substances.
QUALITY
Safety and quality is very important to HEMA. We have our own laboratory, which assesses all equipment in
terms of electrical safety and ease of use, before it is included in our range. HEMA also monitors the product
quality in collaboration with the manufacturer.