HCA-60 PLAY
2x30W Mini Digital Amplifier with USB & BT
9
2. POWER Switch
- It turns on and off the unit.
3. MIC 2
- Use this 1/4” (6,5mm) Jack to connect dynamic microphones.
4. LINE IN
- Use this stereo RCA line input to connect external sound source,
like mixers, CD-players, Tuners, etc.
5. LINE OUT
- Use this stereo RCA line output to connect to external mixers,
amplifiers, etc.
6. Speaker Output
- Use this 4-pin phoenix plug to connection 4ohm to 16ohm
loudspeakers. In case of parallel wiring of multiple speakers, please pay
attention to not get total impedance lower than 4ohm, which will cause the
overloading protection of the system.
7. SD Slot
- It is used to connect the external SD-Card (FAT-32, max 32GByte).
When inserted, it will play automatically.
4.3. Remote Control
STOP
MODE
EQ
1
2
3
4
5
6
7
8
9
0
11. Volume up
8. Next
9. Pause/Play
5. Play mode
6. Balance
12. Numbers
7. Previous
10. Volume down
4. Mode Selection
3. Mute
1. Off/On
2. Stop
1.
On/Off
: Long press to switch On/Off the unit
2. STOP
: Press to stop file reproduction in BT, USB or SD playing
3. Mute
: Press to temporarily mute the unit. Press again to activate audio.