GLOBE-410W
10W Pendant Ceiling Speaker
8
ers at distorted volume levels are no covered by warranty.
6.1. Example of 70V/100V System Configuration
5 speakers connected in parallel using 10W Taps
NOTE: Total number of speakers multiplied by tap value cannot
exceed the output power (in watts) of the 70V/100V amplifier. The
above examples shows 5 total speakers in a 100V system. If you use
10W tap position, you need an amplifier with at least 5x10=50W. A
good rule of thumb is to use an amplifier with 20% greater power; in
this case, an amplifier with 60W or more.
6.2. Example of Low-Impedance Configuration
4 speakers connected to 4Ω outputs of a stereo low-impedance amplifier