Helvi PC103, Инструкция по эксплуатации

Страница: 18 / 72

EN-14
Green Led ON, Amp Led ON, all
other Leds OFF, no air flow once
torch trigger is pressed.
Shield cup not properly installed
on torch.
Check that shield cup isfully seated
against torch.
Faulty Torch Switch or Parts
Assembly in torch holder.
Refer to Maintenance paragraph.
Faulty Main PC Board Repair / Replace Power Supply.
Green Led ON, Amp Led ON,
all other Leds OFF, air flows once
torch trigger is pressed. Torch
doesn’t strike the arc.
Faulty torch parts Inspect torch parts and replace if
necessary.
Faulty Main PC Board Repair / Replace Power Supply.
Torch has pilot arc but does not
cut.
Work lead not connected. Make sure work lead is connected
securely to bare metal.
AC input power too low. Use shortest distance to breaker
panel possible.
Faulty Main PC Board Repair / Replace Power Supply.
77611911 - GB