Helvi DISCOVERY MOTO, Инструкция по эксплуатации

Страница: 6 / 8

• Remove personal metal items such as rings, bracelets, necklaces, and watches
when working with a lead-acid battery.
• A lead-acid battery can produces a short-circuit current high enough to weld a
ring or the like to metal, causing severe burns.
Product Operation and Precautions
The product adopts the state-of-art switching power supply and hardware intelligent
management with high efficiency, low loss, light weight, and beautiful appearance. It
is the best choice for automobile storage battery charging.
DISCOVERY MOTO is the intelligent three-stage charger suitable for 12V storage
battery with capacity of 6 to 20Ah. It provides charging current of 1.5A. IP 65.
Please check if your operation is right. Improper operation may result in dangers.
1. 200-240VAC: please check if the mains voltage complies with product specifica -
tions before use. When power is on , power LED is green
2. Charging 12V storage battery: clamp the positive electrode with the red clip and
clamp the negative electrode with the black clip. Improper operation would result in
failure of charging. Please correct it in time.
When battery is charging, then Charge LED is red
If battery is full, then charge LED is green
If charge LED is off, battery is full, you should stop charging .
3. Please avoid storing the product in high temperature above 40°
Battery Charge and electronic parameter
The product can provide three-stage battery charge modes at most: constant cur -
rent, constant voltage, and floating charge.
1 Protection
• Short-circuit protection
• Reverse polarity protection
2 Maximum conversion efficiency>75%
3 Operating characteristics of DISCOVERY MOTO
Modes 12V Temperature
Detect battery
automatically
Whether voltage exceeds charging
voltage (3.5V)
0÷40°C
Constant current 1.5A, until the voltage reaches 13.8V 0÷40°C
Constant voltage Current reduces until voltage rea -
ches 14.2V
0÷40°C
Floating charge 13.4V~14V, output current avoids
battery voltage dropping
0÷40°C