Data subject to change without notice. For more information visit our website: www.helvar.com
7
A “
0/1
” (ON/OFF) key.
• Toggles the lighting between 100%*
)
and OFF.
B “
1
”, “
2
”, “
3
” or “
4
” key.
• Recall of stored scene or preset level for the selected key.
C “ ” key.
• Single push.
• Switches channel A & B on to minimum level (if lights were off).
• Steps up channel A & B by one step (if lights were on).
• Press & hold.
• Dims up channel A & B from minimum (if lights were off).
• Dims up channel A & B from last level (if lights were on).
D “ ” key.
• Single push.
• Steps down channel A & B by one step (if lights were on).
• Press & hold.
• Dims down channel A & B from last level (if lights were on).
Infrared (IR) control
1
3
4
2
0/1
Notes:
• Scene is a combination of light levels of channel A and B that can be recalled by the press of a button.
• Storing scenes on buttons “
1
” to “
4
” will replace any previously stored preset light levels.
Modify and store preset light levels.
• Use the remote control “ ” or “ ” keys to adjust the lighting of channel A & B to the desired
level.
• Press & hold (for 10 seconds) the desired remote control scene button (“
1
”, “
2
”, “
3
” or “
4
”)
where you would like the preset level to be stored.
• The operation is confirmed by flashing the lamps.
Modify and store scenes (channel A & B).
• Simultaneously press & hold “
1
” & “ ” or “ ” to raise or lower the light level of channel A to the
desired level.
• Simultaneously press & hold “
2
” & “ ” or “ ” to raise or lower the light level of channel B to the
desired level.
• Press & hold (for 10 seconds) the desired remote control scene button (“
1
”, “
2
”, “
3
” or “
4
”)
where you would like the scene to be stored.
• The operation is confirmed by flashing the lamps.
• Repeat the above for up to 4 scenes. (buttons “
1
” to “
4
”)
*) If Constant light has been enabled and programmed the Minisensor will set the lights to the Constant
light level after a short period of time.
Содержание Minisensor
Страница 1: ...Minisensor User guide Ref 2 0 1 ...