Helvar
|
Helvar Oy Ab, Keilaranta 5 FI-02150 Espoo, Finland. Data is subject to change without notice. www.helvar.com
Functional Description
• DALI Type 8 compatible. One DALI address for controlling colour temperature by two output channels
• DALI colour type: Colour temperature T
c
• Adjustable constant current output: 350 mA (default) to 700 mA
• Current setting with external resistors
• Patented Switch-Control funtionality for easy-to-use intensity and colour temperature control with single push button
• Overload, open & short circuit protection
• NTC terminal for overtemperature protection
• Helvar Driver Configurator Support
• Power consumption monitor (real time), running hour monitor (accumulative), energy management (accumulative)
Mains Characteristics
Voltage
range
198
VAC
–
264 VAC
Withstands max. 320 VAC (max. 1 hour)
DC
range
176
VDC
–
280 VDC
starting voltage
> 190 VDC
Mains current at full load
0.26 – 0.34 A
Frequency
0
/
50
Hz
–
60 Hz
Stand-by power consumption
< 0.5 W
THD at full power
< 12 %
Leakage current to earth
< 0.4 mA
Tested surge protection
1 kV L-N, 2 kV L-GND (IEC 61000-4-5)
Tested fast transient protection
4 kV (IEC 61000-4-4)
Insulation between circuits & driver case
Mains circuit - SELV circuit
Double/reinforced insulation
DALI circuit - SELV circuit
Double/reinforced insulation
Mains circuit - DALI circuit
Basic insulation
Mains circuit - Driver case
Double/reinforced insulation
Load Output (SELV <120 V)
Output current (I
out
)
350
mA
(default)
–
700 mA
Accuracy
±
5
%
Ripple
< 2 %* at ≤ 120 Hz
*) Low frequency, LED load: Cree XP-G LEDs
U
out
(max)
(abnormal)
120
V
I
out*
350 mA
700 mA
P
OUT(MAX)*
35 W
60 W
U
OUT
25 – 100 V
25 – 85 V
PF (λ) at full load
0.98
0.98
Efficiency (η) at full load
89 %
90 %
60 W
Dimmable two channel
intelligent Colour LED driver
• 2-channel tunable white for human centric lighting
• Colour temperatures adjustable on all dimming levels
• High efficiency up to 90 %
• Low current ripple
• Suitable for DC use
• Long lifetime up to 100 000 h
• Driver protection Class II
• Suitable for Class I and Class II luminaires
• For driving Class III (SELV) luminaires, optional strain relief available
for independent use outside of luminaire (LL1x2135-SR)
60 W 220
–
240 V 0 / 50
–
60 Hz
Product code: 5533
*Current and power are divided into two channels according to the chosen CCT and module specifications. Total maximum power of the two channels can’t exceed given P
OUT(MAX)
.
27.11.2018 1/6
T22 043 1C
LL60/2-E-DA-iC
