5
4. Place the right side panel and the left side panel in the slot of floor panel.
5. Place the bench support panel first and then place the bench surface panel into the sauna
room.
※
On larger sauna rooms with more than one bench, rotate the wooden bench supports
away from the side walls.
※
The side with Heating Film should be faced outside.
※
Make sure the two side slots of the long & short bench support panel are inserted
into the corresponding groove at both sides smoothly and completely. (Refer to
picture 1 )
※
Connect the power connector at the Floor Panel and that of the left (or right) back
Panel at the bottom on right side into the white box A. (Refer to picture 2 )
※
Connect the power connector at the back of Long (or Short ) Bench Support Panel and
that of the left (or right) back Panel at the bottom on right side into the white box A.
(Refer to picture 2 )
※
Place the Bench Surface Panel on the Bench Support Panel and slide toward the Back
Wall until half. (Refer to picture 2 )
※
Connect the power connector at the back of Long (or Short ) Bench Surface Panel and
that of the left (or right) back Panel at the bottom on right side into the white box B.
(Refer to picture 3)
※
Place the Bench Surface Panel on the Bench Support Panel and slide toward the Back
Wall until flush to the Back Wall. (Refer to picture 4)
Picture1
Picture2
A
