Helo CAMERA-B-KIT, Быстрый старт

Страница: 9 / 152

EN
V. Adding Device
1. Add Base Station
1 Please connect your mobile and base station to one router.
2 Open “Helo by Strong” App, click the top right “+” to add
device.
3 Select “Video Surveillance—Base Station”, follow the
instructions to add the base station.
2. Add Camera
1 Please press the On/Off button of all cameras one by one.
2 Then the cameras will beep, and the indicator light of the
camera starts to fl ash red; If the indicator light does not fl ash red,
please press and hold the reset button for 5s to reset the camera.
3
Enter the Base station interface on the app, click the “+Add
Device” in bottom, or press the pairing button on top of the
base station to enter pairing status, the Indicator light 2 will fl ash
green.
4 When the camera successfully pairs to base station, a voice
prompt will be heard from camera and camera’s indicator light
will turn green, while Indicator light 2 of base station will turn off
and base station exit the pairing status. Then the added cameras
will be displayed on the app.
5
If there is any camera that could not pair to the base station,
please add the camera again following the above +
1 +2 +3
+steps.
VI. Charging Camera
1. The camera is with built-in 6000mAh rechargeable battery.
2. When charging, please use the camera USB cable to connect
camera and camera adaptor, then plug the adptor into power outlet
(100v-240v) for charging. The indicator light on camera will turn
EN
2
Enter your verifi cation code
Enter verification
code
A verification code has been sent to your email:
abcd@abcd.com, Resend(51s)
3. Connecting Device
1
Use the Ethernet cable to connect the Base Station to
Router’s LAN port.
2
Plug the adapter to the power outlet to power on the base
station. The Indicator light 1 will change from solid red to blink red
when the base station is ready for pairing.
Internet
1. Need one router connecting to internet
2. Need an Uplink connection with at least 2 Mbps
speed