6
NOTE:
The projected time is intended for display on the ceiling or wall of a
darkened room. The projection range is 3 – 9 feet.
SETTING ALARMS
1. Press the
ALARM 1 SET / ALARM 2 SET
button (20/19) once to preview the
alarm time. The alarm time is displayed and will blink.
2. Press & hold the
ALARM 1 SET / ALARM 2 SET
button (20/19) for 3 seconds
and the hours will blink. Press the
(16) or
(14) button to set the alarm hour.
3. Press the
ALARM 1 SET / ALARM 2 SET
button (20/19) again and the minutes
will blink. Press the
(16)
or
(14) button to set the alarm minutes.
4. Press the
ALARM 1 SET / ALARM 2 SET
button (20/19) to set the alarm sound
mode: Buzzer (bu) or Radio. The alarm sound mode will blink. Press
(16)
or
(14) button to set the alarm sound mode.
5. If you select Radio as the alarm sound mode, the volume will blink on the display.
Press
(16)
or
(14) button
to select the desired radio volume. Then press
the
ALARM 1 SET / ALARM 2 SET
button (20/19) to set the volume.
6. If you select Buzzer as the alarm sound mode, the volume of the buzzer alarm
will gradually increase when it sounds.
7. To turn off the Radio or Buzzer alarm after it sounds, turn it OFF by pressing the
ALARM 1 SET / ALARM 2 SET
button (20/19).
NOTE:
You should tune to your desired radio station first before starting to set the alarm
time and choosing the radio alarm mode.
Alarm 1 / 2 will ring again at the same time each day unless disabled.
To stop Alarm 1 / 2 from automatically sounding on the following days, press &
hold
ALARM 1 SET / ALARM 2 SET
button (20/19) for 3 seconds in standby
mode, the
ALARM 1 / 2 indicator
will be turned off and alarm 1 / 2 will be
disabled.
To resume alarm 1 / 2, press & hold
ALARM 1 SET / ALARM 2 SET
button
(20/19) again for 3 seconds in standby mode.
SNOOZE FUNCTION
When the alarm rings, press
SNOOZE
button (1) to suspend the alarm and activate
the snooze function, alarm will stop & will ring again 9 minutes later. If you press
SNOOZE
button again, the alarm will stop momentarily and ring again in 9 minutes
and so on.
NOTE:
The Snooze interval time is fixed at 9 minutes.
To turn the Snooze function OFF, press the
ALARM 1 SET / ALARM 2 SET
button (20/19) once.
If you press and hold the
ALARM 1 SET / ALARM 2 SET
button (20/19), the
alarm indicator will be turned off, indicating that the alarm is disabled.
SLEEP FUNCTION
When listening to radio, press
SLEEP
button (1) to enter sleep mode. You can just
adjust the sleep timer from 10 to 90 minutes by pressing the
SLEEP
button (1). The
unit will automatically turn off after the selected time expires.
