background image

3.  To set at the maximum sleep time of 1:59, press the Sleep Button 

  (#15). The display will show “0:59” sleep time. While holding the 

  SLEEP button, press the HOUR button. The display will show “1:59” 

  sleep time and the radio will begin to play. After 1 hour 59 minutes, 

  the radio will shut off automatically.

  To set the Sleep Timer between “0:59” and “1:59”, press the Sleep 

  Button (#15) together with the HOUR button till it shows “1:59”. 

  Then, press the Sleep Button (#15) together with the Minute Button 

  (#13) until the desired “SLEEP” time is shown on display.

4.  After the preset “SLEEP” time has elapsed, the radio will switch 

  off automatically. To switch if off before the preset “SLEEP” time has 

  elapsed, press SNOOZE BUTTON.

SLEEP AND WAKE TO RADIO

1.  Set the desired alarm time as described in the section “SETTING 

  THE ALARM TIME” and set the ON/OFF/AUTO FUNCTION 

  SWITCH to the “AUTO” position. 

2.  Set Sleep time as described in SLEEP TIMER OPERATION. 

3.  The radio will switch off after the preset sleep time has elapsed and 

  radio alarm will switch on next day at the preset time.

CARE AND MAINTENANCE

1.  Clean the unit with a soft, damp (never wet) cloth. Solvent or 

  detergent should never be used.

2.  Avoid operating your unit under direct sunlight or in hot, humid or 

  dusty places to reduce the risk of fire or electric shock. 

3.  Keep your unit away from heating appliances and sources of 

  electrical noise such as fluorescent lamps or motors.

4.  For better Clock Display clarity, avoid operating the unit under direct 

  sunlight or in strong room illumination.

5.  Unplug the unit from the electrical power outlet immediately in case 

  of malfunction.

**THIS PRODUCT IS NOT A TOY

       

9

Содержание KT2064













Отзывы: